Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes

作者：Zhang, Shizhe^*; Li, Zhenming; Ghiassi, Bahman; Yin, Suhong; Ye, Guang^*

来源：Cement and Concrete Research, 2021, 144: 106447.

DOI：10.1016/j.cemconres.2021.106447

• Fracture toughness
• Alkali-activation
• Slag
• Fly ash
• Microstructure
• Ca/Si

This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-(N-)A-S-H gel substantially governed by its Ca/Si ratio. Strong positive correlations are identified between the Ca/Si ratios of C-(N-)A-S-H gel and the fracture properties K-Ic (J(tip)), whereas, the compressive strength of AASF pastes is primarily determined by its capillary porosity (>0.01 mu m). The disagreements between the Ca/Si ratios and corresponding intrinsic mechanical properties of C-(N-)A-S-H gel as proof by contradiction indicate that the fracture properties K-Ic (J(tip)) of AASF pastes could be dominated by a cohesion/adhesion-based mechanism. These findings provide promising guidance for fine-tuning the fracture properties of AASF and also advise on the tailoring strategies for high-performance composite such as strainhardening geopolymer composite.

• 单位
  1