摘要
TiN nanoparticle reinforced AlSi10Mg composite powder was produced by a novel ultrasonic vibration dispersion technique. The TiN/AlSi10Mg composites were fabricated via selective laser melting (SLM). The effects of scanning speed on the microstructure, particle distribution state, and tribological properties of the as-built composites were studied. Experimental results showed a better SLM processibility for the composite powder due to the considerable improvement of laser absorption capacity. The microstructure of as-built composite parts was remarkably refined with a gradually decreased average grain size from 0.388 mu m to 0.284 mu m by increasing scanning speed compared to that of AlSi10Mg part (similar to 0.579 mu m). Nano-sized TiN particles were evenly distributed and well-bonded in the composite matrix while minimized agglomerated TiN particles gathered and grew into large spherical clusters. Because of the in-situ reaction occurred between TiN cluster and AlSi10Mg matrix, novel graded interfacial layers were observed. The mean layer thickness increased from 0.11 mu m to 0.38 mu m by decreasing the scanning speed from 600 mm/s to 200 mm/s. Taking advantage of the dispersion strengthening, fine grain strengthening, and the graded interfacial layer, a considerably-high microhardness (145 +/- 4.9 HV), and enhanced wear performance were achieved.
学科与关键词
- Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser meltingGao, C.; Wu, W.; Shi, J.; Xiao, Z.*; Akbarzadeh, A. H.*Additive Manufacturing, 2020, 34: 101378.被引 114
- Microstructure and mechanical properties of a novel (TiB2+TiC)/AlSi10Mg composite prepared by selective laser meltingCheng, Wen; Liu, Yunzhong*; Xiao, Xiaojun; Huang, Bin; Zhou, Zhiguang; Liu, XiaohuiMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2022, 834: 142435.被引 29
- Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical propertiesGao, C.; Liu, Z.; Xiao, Z.*; Zhang, W.; Wong, K.; Akbarzadeh, A. H.*Journal of Alloys and Compounds, 2021, 853: 156722.被引 36
