摘要
The application of polylactic acid (PLA) is limited by its relatively low ductility and strength capacity owing to a high level of crystallization. This study investigates the potential of introducing short polyester fibers in a PLA polymer matrix to address the limitations and enhance the structural flexibility of PLA. Virgin and treated polyester fibers (alkali-, silane-, and alkali-silane-treated) were tested, and at a fiber volume fraction of 40%, the tensile strength of the short polyester fiber/PLA composites was enhanced by 133.4%, 139.7%, 176.2%, and 260.6%, respectively. Similar tests were conducted with the additional inclusion of continuous carbon fibers, and the tensile strength of the resulting continuous carbon fiber-short polyester fiber (40%)/PLA matrix composite was enhanced by 35.1% (virgin), 37.7% (alkali-treated), 51.1% (silane-treated), and 63.8% (alkali-silane-treated). Continuous carbon fibers with a short polyester fiber/PLA matrix composite are compatible with the strength and stiffness of the plain continuous fiber-reinforced composite as well as commercial alternatives. This new type of composite meets the industrial requirements of clean production, high sustainability, low cost, and high-volume fabrication.
学科与关键词
- Fused filament fabrication of continuous optic fiber reinforced polylactic acid compositesYan, Rui; Wang, Yuye; Luo, Pengjun; Li, Yangbo*; Lu, XiaochunRAPID PROTOTYPING JOURNAL, 2022, 28(4): 766-776.被引 6
- Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical PerformanceLiang, Zhifang; Wu, Hongwu*; Liu, Ruipu; Wu, CaiquanPolymers, 2021, 13(7): 1124.被引 11
- Fabrication of outstanding mechanical performance engineered poly (lactic acid)/thermoplastic poly(ester)urethane in-situ nanofiber composites with a large-scale industrial innovation methodologyHe, Yue; Fang, Cong; Xu, Wen-Hua; Tan, Ling-Cao; Qin, Sen; Yin, Xiao-Chun; Feng, Yan-Hong; Park, Chul B.*; Qu, Jin-Ping*Chemical Engineering Journal, 2023, 457: 141371.被引 2
