摘要
Selective laser melting (SLM) has the advantage in preparing supersaturated solid solutions due to its unique thermal field and high solidification rate. In this study, a face-centered cubic single-phase FeCrNi medium entropy alloy (MEA) with an ultrahigh Cr content (similar to 35 at.%) was additively manufactured by SLM. The as-built MEA shows a hierarchical microstructure of coarse columnar grains and submicron dislocation cell structures, where the cell boundaries are probed segregated with Cr and C and decorated with nano carbides. The appearance of these dislocation barriers results in an excellent combination of strength (sigma(0.2) = 745 MPa, sigma(UTS)= 1007 MPa) and ductility (epsilon(r) = 31%). The current MEA also shows a superb corrosion resistance with a corrosion current density of 0.06 mu A cm(-2) in 3.5 wt.% NaCl solution, which is far lower than that of 316 L. The high content of solutioned Cr in the MEA ensures sufficient Cr supply to form an integrated Cr2O3 passive film, and the large number of cell boundaries acting as the diffusion channels lead to the fast formation of a stable passive film over the alloy surface.
学科与关键词
- 3D printed N-doped CoCrFeNi high entropy alloy with more than doubled corrosion resistance in dilute sulphuric acidZhou, Rui; Chen, Wenyu; Li, Wanpeng; Chou, Tzu-Hsiu; Chen, Yen-Hsiang; Liang, Xiaopeng; Luan, Junhua; Zhu, Yuntian*; Huang, J. C.*; Liu, Yongnpj Materials Degradation, 2023, 7(1): 8.被引 3
- Tuning the strength and ductility balance of a Co32Cr36Ni32 medium entropy alloy fabricated by selective laser melting: Effect of segregations along grain boundariesPan, Cunliang; Li, Xiaoqiang*; Luo, Hao; Kosiba, Konrad; Qu, Shengguan; Yang, Chao; Zhu, Dezhi; Zhang, CongMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2022, 840: 142923.被引 11
- Effect of interstitial carbon and nitrogen on corrosion of FeCoCrNi multi-principal element alloys made by selective laser meltingChen, Wenyu; Zhou, Rui; Li, Wanpeng; Chen, Yen-Hsiang; Chou, Tzu-Hsiu; Wang, Xu; Liu, Yong; Zhu, Yuntian*; Huang, J. C.*JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2023, 148: 52-63.被引 6
