Quality assurance and quality control of solid phase extraction for PFAS in water and novel analytical techniques for PFAS analysis

摘要

An inter-laboratory trial (ILT) has been performed to validate ISO 21675 method for the measurement of per-and polyfluoroalkyl substances (PFAS) in water samples using solid phase extraction method and high-performance liquid chromatography-tandem mass spectrometry. A total of twenty-seven laboratories from eleven countries (Belgium: 1, Canada: 2, China: 2, France: 1, Germany: 3, Italy: 2, Japan: 6, Netherlands: 2, South Korea: 1, Sweden: 4, and USA: 3) participated in the ILT. Results of the homogeneity of ILT water samples showed that the repeatability tended to increase from short-chain to long-chain of PFAS. Results of stability of PFAS in Milli-Q water stored at 5 +/- 3 degrees C ranged from 75% to 121% including those ultra-short-chain compounds, except for N-MeFOSA (44%), N-EtFOSA (44%), and 8:2 FTOH (30%) at 168 days. As for stability of PFAS in environmental waters, they were in acceptable range (between 70 and 125%) for most of PFAS, except for 8:2 FTUCA in the river water, seawater, and wastewater, and 8:2 FTSA and 8:2 FTOH in wastewater. Based on the performance data (reproducibility (CVR): <40%, recoveries (eta): 70-125%) of the ILT, current ISO 21675 is validated for up to 30 PFAS depending on water type. Novel analytical techniques namely "In-situ Solid Phase Extraction" and the

关键词