ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Structural design and performance analysis of a self-driven articulated arm coordinate measuring machine

Yang, Hongtao*; Shen, Mei; Zhang, Mengyao; Cheng, Jingjing; Hu, Tingting; Hu, Yianhui univ
Measurement Science and Technology2022-3DOI: 10.1088/1361-6501/ac3857
4被引7阅读
引用收藏
分享

摘要

In order to solve the problem that a traditional articulated arm coordinate measuring machine (AACMM) cannot measure automatically, a self-driven AACMM is proposed. Based on the self-driven AACMM design indicators, the length of the connecting rods of the self-driven AACMM was allocated. The self-driven AACMM virtual prototype was designed and assembled based on joint module selection and joint component design, and its measurement space range was also verified. The key components of the structural optimized design and dynamic performance analysis of motion parameters are adopted, respectively, to correct the positioning error of the self-driven AACMM's probe caused by static and dynamic deformations. The static deformation of the structure caused by the self-driven AACMM's weight was analyzed. The influence of the dynamic flexible deformation on the positioning error of the probe of the self-driven AACMM during the variable-speed approach and the constant-speed touch measurement stage was studied. The results show that the measurement space range of the self-driven AACMM designed in this paper can meet the design index of the measuring radius. The probe position error caused by static deformation of the measuring machine after structural optimization is reduced by an order of magnitude, and the equivalent stress of the mechanical structure of the self-driven AACMM is within the allowable stress of the material. The positioning error of the probe caused by the dynamic deformation of the self-driven AACMM structure meets the positioning accuracy index. During the stage of self-driven AACMM constant-speed touch measurement, the instantaneous position error of the probe changes linearly with the touch time and the optimal touch speed (6.6 mm s(-1), 6.4 mm s(-1)) exists to minimize the probe positioning error. During the variable-speed approach stage, the influence of the angular acceleration and the angular velocity of each joint on the positioning error of the probe is negligible when the self-driven AACMM is in the typical posture. In the extreme posture, with the optimal joint angular acceleration (0.00055 degrees s(-2)) and angular velocity (0.0185 degrees s(-1)), the inertial force of the measuring machine structure and the instantaneous position error of the probe are the smallest, and the movement stability is the best. The structural optimization design and motion parameter performance analyses of the self-driven AACMM can provide a theoretical research foundation for subsequent motion parameter optimization and dynamic error compensation modeling.

学科与关键词

关键词
AACMMjoint modulestructural designstatic analysisdynamic simulationflexible deformationpositioning error
相关
加载中…
  • Structural design and performance analysis of a self-driven articulated arm coordinate measuring machine (vol 33, 035005, 2022)
    Yang, Hongtao*; Shen, Mei; Zhang, Mengyao; Cheng, Jingjing; Hu, Tingting; Hu, YiMeasurement Science and Technology, 2022, 33(6): 069501.
  • Joint module angle error analysis and modelling of self-driven articulated arm coordinate measuring machine
    Shen, Mei; Yang, Hongtao*; Cheng, Jingjing; Zhang, Mengyao; Hu, Tingting; Hu, YiJournal of Mechanical Science and Technology, 2022, 36(12): 6329-6344.
  • Self-Calibration Vision Method and System for Automatically Moving CMM Stylus Into Micro Holes
    Cheng, Zhen-Ying; Sun, Yuan; Luan, He; Li, Hong-Li; Pan, Qiao-Sheng; Li, Rui-Jun*IEEE SENSORS JOURNAL, 2022, 22(4): 3579-3584.被引 1
查看全部 →

发表信息

论文状态
公开发表
期刊
Measurement Science and Technology
发表日期
2022-03
卷期
第 33 卷, 第 3 期
页码
035005
DOI
10.1088/1361-6501/ac3857
语言
ENGLISH
期刊等级
3区
成果收录
SCIE
资助标注
National Natural Science Foundation of China [51775163]; Key Research and Development Projects in Anhui Province of China [202004a07020046]

作者

  • Y

    Yang, Hongtao (通讯) (第一作者)

    anhui univ

  • S

    Shen, Mei

    anhui univ

查看全部 6 位作者收起作者
  • Z

    Zhang, Mengyao

    anhui univ

  • C

    Cheng, Jingjing

    anhui univ

  • H

    Hu, Tingting

    anhui univ

  • H

    Hu, Yi

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417