ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Fine-Grained FeCoNi(CuAl)x High Entropy Alloys: Phase Transformation, Microstructure Evolution and Mechanical Properties

Long, Yan*; Li, Guiqi; Liang, Xiaobiao; Peng, Haiyany
Frontiers in Materials2020-10-29DOI: 10.3389/fmats.2020.537812
8被引8阅读
引用收藏
分享

摘要

A series of fine-grained FeCoNi(CuAl)(x) (x = 0, 0.4, 0.6, 0.8, 1.0) medium-entropy alloy (MEA) and high-entropy alloys (HEAs) were fabricated by Mechanical Alloying (MA) and Spark Plasma Sintering (SPS). The effect of Al and Cu content (x) on phase composition, microstructure, and mechanical properties of the alloys was investigated. Experimental results show that the crystal structure of FeCoNi(CuAl) x alloy transforms from single (face-centered cubic) FCC phase for x = 0.4 similar to 1.0 to FCC + BCC duplex phases for x similar to 0.4 similar to 1.0, with the fraction of (body-centered cubic) BCC phase gradually increasing with the increase of x. Adding a low content of Al and Cu elements to FeCoNi alloy can significantly hinder the grain growth during sintering process, the average grain size of FCC phase decreases from 0.95 to 0.30 mu m at x = 0.4. However, the grain sizes of FCC and BCC phases gradually grow up when x increases from 0.4 to 1.0. The variation in grain size indicates that the atomic diffusion rate of sintered alloy may be influenced by the sluggish diffusion effect in HEA as well as the content of Al and Cu with lower melting points. Mechanical properties of the HEAs are mainly affected by the volume fraction of BCC phase. The compressive yield strength and hardness of HEAs are improved at first and then slightly reduced, while the plasticity drops down continuously with the increase of x. The bulky HEA achieved excellent comprehensive mechanical properties with a compressive yield strength of 1,467.7 MPa and plastic strain to failure of 24.9% at x = 0.6, due to the fine duplex microstructure.

学科与关键词

关键词
high-entropy alloysphase transformationfine-grainedmechanical propertiesspark plasma sintering
相关
加载中…
  • Microstructure and Mechanical Behavior of FeNiCoCr and FeNiCoCrMn High-Entropy Alloys Fabricated by Powder Metallurgy
    Chu, Chenliang; Chen, Weiping; Chen, Zhen; Jiang, Zhenfei; Wang, Hao; Fu, Zhiqiang*Acta Metallurgica Sinica-English Letters, 2021, 34(4): 445-454.被引 8
  • Microstructures and Mechanical Properties of FeNiCrMnAl High-Entropy Alloys
    Ye, Xicong*; Xu, Weiquan; Li, Zhe; Xu, Dong; Zhang, Wen; Li, Bo; Fang, DongJOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31(10): 7820-7829.被引 1
  • Microstructure and mechanical properties of as-cast (CuNi)100-xCox medium-entropy alloys
    Yang, Zhi-yong; Chen, Wei-ping; Hao, Liang-yan; Chu, Chen-liang; Zeng, Da-hai; Xiong, Wei; Fu, Zhi-qiang*China Foundry, 2022, 19(6): 511-518.
查看全部 →

发表信息

论文状态
公开发表
期刊
Frontiers in Materials
发表日期
2020-10-29
卷期
第 7 卷
页码
537812
DOI
10.3389/fmats.2020.537812
期刊收录
NSL.SCIE
期刊等级
4区
成果收录
SCIE
资助标注
National Natural Science Foundation of China [51104066]

作者

  • L

    Long, Yan (通讯) (第一作者)

  • L

    Li, Guiqi

查看全部 4 位作者收起作者
  • L

    Liang, Xiaobiao

  • P

    Peng, Haiyan

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417