Lightweight multifunctional polypropylene/carbon nanotubes/carbon black nanocomposite foams with segregated structure, ultralow percolation threshold and enhanced electromagnetic interference shielding performance

作者：Ju, Jiajun; Kuang, Tairong^*; Ke, Xipeng; Zeng, Min; Chen, Zhou; Zhang, Shuidong; Peng, Xiangfang

来源：Composites Science and Technology, 2020, 193: 108116.

DOI：10.1016/j.compscitech.2020.108116

• Structural composites
• Electrical properties
• Strength
• Deformation

Lightweight polypropylene (PP) composite materials are preferred to other polymer-matrix composites, in the conductive and electromagnetic interference (EMI) shielding industries, due to their pronounced advantages. However, facile and high-efficiency fabrication of low-density multifunctional PP composite foams, for EMI shielding, remains a challenge. In this study, we fabricated lightweight polypropylene (PP)/carbon nanotubes (CNTs)/carbon black (CB) nanocomposite foams by combining high-speed mechanical mixing, structural manipulation and solid-state supercritical carbon dioxide (ScCO2) foaming. Due to the "brick and mud" dense structure formed by high-speed mechanical mixing and structure manipulation, we obtained a low density (0.082-0.101 g/cm(3)) after solid-state ScCO2 foaming in the nanocomposite foams containing hybrid nanofiller (1:1). Specifically, segregated synergistic conductive networks were observed in the nanocomposite foams. With such networks, the nanocomposite foams containing hybrid nanofiller (1:1) exhibited the best electrical properties (similar to 6.67 x 10(-3) S/cm at 5 wt% hybrid filler), and the lowest percolation threshold (0.016 vol%) compared with other systems. Moreover, the nanocomposite foams containing 5 wt% hybrid nanofiller (1:1) showed enhanced specific EMI shielding effectiveness (similar to 72.23 dB.cm(3)/g at X band), and absorption-dominated shielding characteristic. Furthermore, we found a good thermal insulation performance (61.2 mW.m(-1).K-1) and compressive properties (similar to 37.1 MPa.g(-1).cm(3) at 50% strain). Overall, our work provides a simple and versatile strategy for fabricating high-performance PP-based nanocomposite foams. These foams present lightweight, ultra-low percolation threshold, high strength, thermal insulation and good EMI shielding properties.

• 单位
  浙江工业大学; 福建工程学院