Formation of Excellent Cathode/Electrolyte Interface with UV-Cured Polymer Electrolyte through In Situ Strategy

作者：Wei, Zhenyao; Zhang, Tian; Wang, Man; Wu, Wei; Wang, Jun; Li, Shuai; Zhao, Yusheng; Wang, Chaoyang; Yao, Xiayin^*; Xu, Xiaoxiong^*; Deng, Yonghong^*

来源：Journal of the Electrochemical Society, 2021, 168(2): 020511.

DOI：10.1149/1945-7111/abdeed

UV-cured polymer electrolyte is synthesized via photo-polymerization of poly (ethylene glycol) methyl ether methacrylate and poly (ethylene glycol) diacrylate. The obtained polymer electrolyte exhibits a high ionic conductivity of 2.95 x 10(-5) S cm(-1) at 30 degrees C, a wide electrochemical stable window of up to 4.69 V (vs Li/Li+) and excellent compatibility against lithium metal electrode over 800 h. Besides, an integrated cathode/electrolyte interface is constructed through pouring the polymer electrolyte precursor onto the cathode layer. This kind of the integrated cell exhibits faster Li-ion diffusion in cathodic electrochemical reactions than conventional cells. Moreover, LiMn0.8Fe0.2PO4 divide divide Li cells with integrated cathode/electrolyte interface deliver a reversible capacity of 164.7 mAh g(-1) at 0.1C and retains a capacity of 134.4 mAh g(-1) after 240 cycles at 0.2C. Furthermore, the integrated cells show satisfactory performance under disastrous conditions, presenting their high safety. The UV cross-linked polymer electrolyte is a promising polymer electrolyte candidate for high energy density all-solid-state lithium metal batteries.

• 单位
  中国科学院; 中国科学院宁波材料技术与工程研究所