科研之友
微信
新浪微博
Facebook
分享链接
摘要
The rapid advancement of high-performance electronic devices and high-capacity energy storage has prompted the development of ultra-thin heat pipes with a higher heat transfer limit, faster start-up speed, and lower thermal resistance. In the present study, a novel double-layer wick structure comprising sintered copper powder and spiral woven mesh was proposed to analyze how various combinations of porous media properties, struc-tures, and heating surfaces influence the thermal performance of ultra-thin heat pipes. The wick structure consists of two layers: a layer of sintered copper powder with four different particle sizes and a layer of spiral woven mesh. To improve the starting characteristics, the starting time under different thermal loads was studied. Additionally, a comparison study was conducted between the ultra-thin heat pipe with a single type wick structure and the proposed wick structure. The results revealed that the ultimate power in the two horizontal states was 50 W. The thermal resistance of Horizontal-1 (heat applied to the sintered copper powder side) was 0.069 W/degrees C, and for Horizontal-2 (heat applied to the spiral woven mesh side), it was 0.093 W/degrees C, both measured at their respective ultimate thermal loads. Additionally, among all four structures in Horizontal-1, the shortest start-up time occurred at a power of 30 W, with a duration of 42 s. Finally, when compared to the single wick structure, the proposed double-layer wick structure exhibited an 11.1% increase in ultimate power.
