摘要
(TiH2 + ScH3)/Al-Mg composite powders with different Ti contents were produced by ball milling. These composite powders were fabricated to cube and cuboid shape samples via a laser powder bed fusion process with optimal processing parameters. The TiH2 and ScH3 particles underwent dehydrogenation during the laser powder bed fusion process, and these composite powders ultimately formed Al-Mg-Sc-Ti alloys. The relative density, printability, microstructure, hardness and tensile properties of these alloy samples were investigated. The results show that these Al-Mg-Sc-Ti alloys have lower hot-crack sensitivity, having fine equiaxed grains. An Al18Mg3(Ti,Sc)2 intermetallic phase and in situ L12-Al3(Sc,Ti) precipitations formed during the laser powder bed fusion process, which is beneficial for nucleation and dispersion strengthening. The ultimate tensile strength of the Al-Mg-0.7Sc-1.0Ti alloy was 313.6 MPa with an elongation of 6.6%. During the hot isostatic pressing treatment, most of the Mg element precipitated from the matrix and changed the Al3(Sc,Ti) into a Al18Mg3(Ti,Sc)2 precipitate completely. The Al-Mg-Sc-Ti alloys were nearly fully dense after the hot isostatic pressing treatment and exhibited better mechanical properties. The ultimate tensile strength of the Al-Mg-0.7Sc-1.0Ti was 475 MPa with an elongation of 8.5%.
学科与关键词
- Grain refinement and performance enhancement of laser powder bed fusion in-situ processed Al-Mg alloy modified by ScH3 and ZrH2Li, Xiang; Liu, Yunzhong*; Zhou, ZhiguangMaterials Characterization, 2022, 190: 112068.被引 6
- Microstructure characterization and mechanical performance of laser powder bed fusion processed AlMgScZr alloy: Effect of heat treatmentLi, Xiang; Liu, Yunzhong*Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2023, 862: 144501.被引 4
- Laser powder bed fusion of a novel crack-free Al-Mg-Sc-Zr alloy: Printability, microstructure characterization and mechanical performanceLi, Xiang; Liu, Yunzhong*; Tan, Chaolin; Zou, YongmingOptics and Laser Technology, 2023, 162: 109281.被引 2
