ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Radial gradient design enabling additively manufactured low-modulus gyroid tantalum structures

Song, Changhui; Chen, Jiaqi; Lei, Haoyang; Yang, Zhaobin; Deng, Zhengtai; Li, Yueyue; Wang, Jianhua; Yang, Yongqiang; Han, Changjun*gen hosp peoples liberat army
International Journal of Mechanical Sciences2024-1-15DOI: 10.1016/j.ijmecsci.2023.108710
8阅读
引用收藏
分享

摘要

This work proposes a radial graded porosity design for the fabrication of low-modulus gyroid porous tantalum structures via laser powder bed fusion (LPBF) additive manufacturing, utilizing a combination of simulation and experimentation to investigate its influence on mechanical properties and permeability compared to uniform porous structures. The results demonstrate the excellent printability of the gyroid porous tantalum structures, with the porosity deviation ranging from 0.02% to 2.75%. The elastic modulus of the porous structures ranges from 603.6 MPa to 1317.36 MPa, which is as low as that of human cancellous bones. Structures with radial graded design exhibit a similar deformation behavior as the uniform porous structures. However, due to the edge strengthening, the graded porous structures show increased elastic modulus and yield strength by 2.29-13.94% and 0.03-33% respectively, compared to their uniform counterparts. The enhancement in elastic modulus is more significant for the graded porous structures with the porosity lower than 70%, due to the defects caused by longer overhang lengths in areas of higher porosity. The permeability of the porous structures ranged from 4.324 x 10-9 m2 to 9.648 x 10-9 m2 and increased proportionally with porosity, all falling within the range of cancellous bone permeability. The gradient design exhibits a 2% increase in permeability with a porosity of 59.5%, facilitating nutrient transportation and cell migration. Meanwhile, the radial graded design features a larger surface area with higher wall shear stress, which activates cell growth factors and induces stress fiber formation. These findings offer a promising approach to achieving optimal biological performance and a wellmatched elastic modulus with bones through LPBF.

学科与关键词

关键词
Additive manufacturingLaser powder bed fusionFunctionally graded porous structuresTantalumPermeability
相关
加载中…
  • Mechanical Properties of Additively Manufactured Porous Titanium with Sub-Millimetre Structural Units
    Ueda, Masato*; Ikeda, Masahiko; Mori, Shigeo; Doi, Kenji; Kitagaki, Hisashi; Terauchi, ShuntaroMaterials Transactions, 2019, 60(9): 1792-1798.被引 3
  • Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure
    Tan, Chaolin; Deng, Cheng; Li, Sheng; Abena, Alessandro; Jamshidi, Parastoo; Essa, Khamis; Wu, Likang; Xu, Guohua; Attallah, Moataz M.*; Liu, Jia*INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING, 2022, 4(4): 045003.被引 9
  • A novel design method based onmulti-objective optimization for graded lattice structure by additive manufacturing
    Li, Xiangyun; Zhu, Liuxian; Fan, Shuaitao; Wei, Yingying; Wu, Daijian; Gong, Shan*RAPID PROTOTYPING JOURNAL, 2024, 30(6): 1170-1190.
查看全部 →

发表信息

论文状态
公开发表
期刊
International Journal of Mechanical Sciences
发表日期
2024-01-15
卷期
第 262 卷
页码
108710
DOI
10.1016/j.ijmecsci.2023.108710
语言
ENGLISH
成果收录
SCIE
资助标注
Capital's Funds for Health Improvement and Research [2020- 2-5131]; Regional Joint Foundation of Guangdong Province [2020B1515120013]; Guangdong Province Science and Tech- nology Project [2020B090924002]; Special Support Foundation of Guangdong Province [2019TQ05Z110]; Guangdong Basic and Applied Basic Research Foundation [2022A1515010304]; Capital Health Development Scientific Research Project [A5210020]

作者

  • S

    Song, Changhui (第一作者)

  • C

    Chen, Jiaqi

查看全部 9 位作者收起作者
  • L

    Lei, Haoyang

  • Y

    Yang, Zhaobin

  • D

    Deng, Zhengtai

  • L

    Li, Yueyue

    gen hosp peoples liberat army

  • W

    Wang, Jianhua

  • Y

    Yang, Yongqiang

  • H

    Han, Changjun (通讯)

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417