摘要
A novel f.c.c. (CoCrNi)(94)Al3Ti3 medium-entropy alloy strengthened with an L1(2) phase was designed using CALPHAD. Hot rolling, cold rolling, and heat treatment were used to produce a fine grain size (0.61 mu m) and a high volume fraction (0.37) of coherent 23.2 nm diameter L1(2) nanoparticles. This tailored microstructure exhibited an excellent strength-ductility synergy (yield stress similar to 1203 MPa, ultimate tensile strength similar to 1577 MPa, elongation similar to 24%) and a high working hardening rate (3700 MPa at strain of 5%). The contributions from grain boundary strengthening and precipitation strengthening to the yield strength were estimated to be similar to 61%. After the tensile tests, the fraction of LAGBs sharply increased and that of Sigma 3(n) coincidence site lattice boundaries decreased: inverse pole figures indicate the formation of a {101}< 111> texture. Such an ultrafine grain size suppressed deformation twinning, while applied stress led to a higher density of geometrically-necessary dislocations at the grain boundaries compared to the grain interiors.
学科与关键词
- Microstructures and deformation mechanisms of the medium-entropy alloy (NiCoCr)76(Ni6AlTi)3Peng, Hanlin*; Hu, Ling*; Chen, Junfu; Huang, Siming; Li, Liejun; Yi, Yaoyong; Zhou, Feng; Fang, Weiping; Baker, IanMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2022, 849: 143449.被引 6
- Superb strengthening behavior in a precipitation strengthened Co-rich CoCrNiAlTi medium entropy alloy with acceptable ductilityDu, X. H.*; Gai, Y. H.; Li, W. P.; Chou, T. H.; Huang, J. C.*; Shi, C. X.; Duan, G. S.; Wu, B. L.Intermetallics, 2022, 146: 107582.被引 8
- Mechanical properties and microstructural evolution of a novel (FeCoNi)(86.93)Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy techniqueFu, Ao; Liu, Bin*; Xu, Shenghang; Huang, Jing; Zhang, Yuyang; Cao, Yuankui; Liu, YongJournal of Alloys and Compounds, 2021, 860: 158460.
