ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Fabrication and capillary performance of a novel composite wick for ultra-thin heat pipes

Huang Guangwen; Liu Wangyu*; Luo Yuanqiang; Li Yong; Chen Hanyin
International Journal of Heat and Mass Transfer2021-9DOI: 10.1016/j.ijheatmasstransfer.2021.121467
20被引6阅读
引用收藏
分享

摘要

The rapid development of high-performance portable electronics requires ultra-thin heat pipes (UTHPs) with higher heat transfer capacity to meet their heat dissipation needs. Wick structure, the key component of a heat pipe, makes a decisive role in the heat transfer capacity of the heat pipe. However, since the wall thickness of UTHPs is typically < 0.1 mm, it is difficult to machine deep enough grooves on the shell to increase the permeability of the wicks like conventional heat pipes. Therefore, a novel composite wick structure with high permeability for UTHPs is proposed in this study. It is found that the wick with larger pores formed by parallel woven spiral meshes have higher permeability, resulting in more working fluid in the wick, which helps delay the drying out at the evaporation end of heat pipes. To further improve the capillary performance of wicks, the effect of thermal oxidation suitable for mass production on the capillary pumping performance of wicks is systematically studied for the first time. Compared with the single sintered wick, the capillary rise height after oxidation at 400 degrees C, 500 degrees C, 600 degrees C, and 700 degrees C for 150 min increased by about 32.2%, 19%, 19.5%, and 12.9%, respectively. Considering that the copper oxidation may limit the choice of working fluid for the heat pipe, the wicks are heated to 400 degrees C for reduction reaction for 1 h (with 95% N-2+5% H-2 gas). The results show that the capillary rise height of the wicks after oxidation at 400 degrees C, 500 degrees C, 600 degrees C, and 700 degrees C and reduction treatment is about 110%, 127%, 114%, and 91.4% of that of the single sintered wick, respectively. The experimental results show that the maximum heat load power of the UTVCs with 5 layers #200 mesh, single sintered composite wick and 500 degrees C oxidation-reduction wick are 16 W, 29 W and 38 W, respectively.

学科与关键词

关键词
Composite wickOxidationReductionCapillary performanceUltra-thin heat pipe
相关
加载中…

文献加载失败,请重试

重试

发表信息

论文状态
公开发表
期刊
International Journal of Heat and Mass Transfer
发表日期
2021-09
卷期
第 176 卷
页码
121467
DOI
10.1016/j.ijheatmasstransfer.2021.121467
语言
MULTI-LANGUAGE
期刊收录
NSL
期刊等级
1区
成果收录
SCIE
资助标注
National Natural Science Foundation of China [52005188, 51375169]; Guangdong Basic and Applied Basic Research Foundation [2019A1515110587]

作者

  • H

    Huang Guangwen (第一作者)

  • L

    Liu Wangyu (通讯)

查看全部 5 位作者收起作者
  • L

    Luo Yuanqiang

  • L

    Li Yong

  • C

    Chen Hanyin

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417