3-D-Printed Wideband Circularly Polarized MIMO Dielectric Resonator Antenna

作者：Yang, Chen; Leung, Kwok Wa^*

来源：IEEE Transactions on Antennas and Propagation, 2023, 71(7): 5675-5683.

DOI：10.1109/TAP.2023.3270701

• 3-D printing
• circular polarization (CP)
• dielectric decoupler
• dielectric resonator antenna (DRA)
• wideband antenna
• multiple-input-multiple-output (MIMO)

A 3-D-printed wideband circularly polarized (CP) multiple-input-multiple-output (MIMO) antenna is proposed. This antenna consists of two CP dielectric resonator antennas (DRAs) which are covered by a dielectric decoupler. With this decoupler, the center-to-center distance between the two DRAs can be made as small as 0.33?(0) with a high isolation, where ?(0) is the operating wavelength in air. To verify the simulation, a prototype operating in X-band was designed, fabricated, and measured. Its measured -10-dB impedance bandwidth is 21.7% (8.88-11.04 GHz), within which the axial-ratio (AR) bandwidth and mutual coupling are less than 3 and -21.4 dB, respectively. The impedance and AR have a wide overlapping bandwidth of 21.7%.