科研之友
微信
新浪微博
Facebook
分享链接
摘要
A multiscale methodology using scanning and transmission electron microscope, synchrotron X-ray nano -tomography and micro-tomography, small angle neutron scattering, and in situ synchrotron X-ray diffrac-tion has been used, to reveal the effect of Fe-rich phases and precipitates on the mechanical behaviour of an Al-Cu-Mn-Fe-Sc-Zr alloy. The a-Al grains size is reduced from 185.1 & mu;m (0 MPa) and 114.3 & mu;m (75 MPa) by applied pressure. Moreover, it has been demonstrated that suitable heat treatments modify the 3D morphology of Fe-rich phases from interconnected to a disaggregated structure that improves the mechanical properties of the alloy. The size and morphology evolution of fine precipitates under differ-ent ageing temperature and time are revealed. At ageing temperature of 160 & DEG;C, the precipitates change from GP zones to 0' (around 75 nm in length) with ageing time increasing from 1 h to 24 h; the Vick-ers hardness increases from 72.0 HV to 110.7HV. The high ductility of the Sc, Zr modified Al-Cu alloy is related to the complex shape and the loss of interconnectivity of the Fe-rich particles due to the heat treatment. The evolution of the crystal lattice strains in a-Al, and a-Fe calculated during tensile test us-ing in-situ synchrotron X-ray diffraction corroborates the influence of the microstructure in the ductility of the modified alloy.& COPY; 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
-
单位中国科学院; 西南交通大学; 东莞理工学院
