Effect of arc oscillation on porosity and mechanical properties of 2319 aluminum alloy fabricated by CMT-wire arc additive manufacturing

作者：Wei, Yuhan; Liu, Fencheng^*; Liu, Fenggang; Yu, Dong; You, Qifan; Huang, Chunping; Wang, Zhitai; Jiang, Wugui; Lin, Xin; Hu, Xiaoan

来源：Journal of Materials Research and Technology-JMR&T, 2023, 24: 3477-3490.

DOI：10.1016/j.jmrt.2023.03.203

• Wire arc additive manufacturing
• Porosity
• Mechanical properties

In this paper, arc oscillation is applied in the fabrication of 2319 aluminum alloy samples by cold metal transition wire arc additive manufacturing process (CMT-WAAM). The porosity, microstructure and mechanical properties of 2319 aluminum alloy under different arc oscillation patterns were discussed. The results showed that the stirring of arc oscillation can influence the molten pool shape and improve the fluidity, change the thermal distribution and the growth direction of columnar crystal. Arc oscillation has a obvious effect on reducing the grain size and proportion of pores. After using the spiral arc oscillation pattern and asymmetrical trapezoid arc oscillation pattern, the volume fraction of pores reduced from 2.64% to 1.09% and 1.22%, and the size of pores was mainly smaller than 40 mm, respectively. The tensile strength in vertical direction and plasticity were improved with arc oscillation, but its effect on the horizontal tensile strength was not noticeable. After solid solution-aging treatment, the tensile strength of the sample with spiral arc oscillation pattern increased to 277 MPa, with a cross-section reduction of 3.6%.& COPY; 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

• 单位
  南昌航空大学; 西北工业大学