摘要
Objective This study aimed to optimize computed tomography (CT) parameters for detecting ground glass opacity nodules (GGNs) using a computer-assisted detection (CAD) system and a lung cancer screening phantom. Methods A lung cancer screening phantom containing 15 artificial GGNs (-630 Hounsfield unit [HU], 2-10 mm) in the left lung was examined with a CT scanner. Three tube voltages of 80, 100, and 120 kVp were used in combination with five tube currents of 25, 50, 100, 200, and 400 mA; additionally, three slice thicknesses of 0.625, 1.25, and 2.5 mm and four reconstruction algorithms of adaptive statistical iterative reconstruction (ASIR-V) of 30, 60, and 90% were used. For each protocol, accuracy of the CAD system was evaluated for nine target GGNs of 6, 8, or 10 mm in size. The cut-off size was set to 5 mm to minimize false positives. Results Among the 180 combinations of tube voltage, tube current, slice thickness, and reconstruction algorithms, combination of 80 kVp, 200 mA, and 1.25-mm slice thickness with an ASIR-V of 90% had the best performance in the detection of GGNs with six true positives and no false positives. Other combinations had fewer than five true positives. In particular, any combinations with a 0.625-mm slice thickness had 0 true positive and at least one false positive result. Conclusion Low-voltage chest CT with a thin slice thickness and a high iterative reconstruction algorithm improve the detection rate of GGNs with a CAD system in a phantom model, and may have potential in lung cancer screening.
学科与关键词
- Diagnostic validation of a deep learning nodule detection algorithm in low-dose chest CT: determination of optimized dose thresholds in a virtual screening scenarioPeters, Alan A.*; Huber, Adrian T.; Obmann, Verena C.; Heverhagen, Johannes T.; Christe, Andreas; Ebner, LukasEuropean Radiology, 2022, 32(6): 4324-4332.被引 8
- Application of computer-aided detection (CAD) software to automatically detect nodules under SDCT and LDCT scans with different parametersHu, Qiongjie; Chen, Chong; Kang, Shichao; Sun, Ziyan; Wang, Yujin; Xiang, Min; Guan, Hanxiong; Xia, Liming*; Wang, Shaofang*Computers in Biology and Medicine, 2022, 146: 105538.
- Submillisievert Computed Tomography of the Chest Using Model-Based Iterative Algorithm: Optimization of Tube Voltage With Regard to Patient SizeDeak, Zsuzsanna; Maertz, Friedrich; Meurer, Felix; Notohamiprodjo, Susan; Mueck, Fabian; Geyer, Lucas L.; Reiser, Maximilian F.; Wirth, StefanJournal of Computer Assisted Tomography, 2017, 41(2): 254-262.被引 3
