Microstructural evolution and mechanical properties of AlCoCrFeNi high-entropy alloy joints brazed using a novel Ni-based filler

作者：Li, Huaxin; Shen, Weijian; Chen, Weijian; Wang, Weizhen; Liu, Guohao; Lu, Chuanyang; Zheng, Wenjian; Ma, Yinghe; Yang, Jianguo; Ding, Zhenyu; Zou, Hai^*; He, Yanming^*

来源：Journal of Alloys and Compounds, 2021, 860: 157926.

DOI：10.1016/j.jallcom.2020.157926

• High-entropy alloys
• Brazing
• Microstructure
• Mechanical property

This paper reported a route to fabricate a high-performance high-entropy alloy (HEA) brazed joint with the fusion zone similar to the base metal, in which the brazing of a Ni-containing AICoCrFeNi HEA using a novel Ni-based filler was investigated at 1150-1350 degrees C for 0-45 min. A microstructure similar to the base metal was received in the fusion zone through proper interface control, thus the joint shear strength obtained was approximately three times (687.2 +/- 23.2 MPa) in contrast to that of the joint with the heterogenous interface (199.4 +/- 2.8 MPa). The strengthening mechanism was attributed to the high-entropy solid solution, precipitation strengthening and grain refinement occurring in the joint. The highest joint strength of 687.2 +/- 23.2 MPa was received at 1300 degrees C for 15 min with the fracture mainly happening in the base metal. The brazed joint exhibited desirable high-temperature stability with minor degradation of joint strength (similar to 3%) after annealing of 800 degrees C for 240 h. The excellent joint performances are potential for high temperature applications.

• 单位
  浙江工业大学; 复旦大学