摘要
Cu-15Ni-8Sn alloy with layer-by-layer periodic heterogeneous microstructures composed of ultrafine equiaxed (similar to 2.6 mu m) and coarse columnar (similar to 12.8 mu m) grains was successfully fabricated by laser powder bed fusion (LPBF) additive manufacturing. The microstructures were composed of Sn-depleted alpha-Cu (Ni, Sn) matrix and Snenriched gamma-(CuxNi1-x)3Sn nano-precipitates. The gamma nano-precipitates were found to be mainly uniformly distributed at the melt pool boundaries due to Sn reverse segregation, as though the densely distributed seeds on the surface of a strawberry. The interesting periodic bi-modal microstructure exhibited a simultaneous positive effect on the enhancement of strength and ductility. The yield strength, ultimate tensile strength and elongation at break were (474.04 +/- 2.88) MPa, (584.36 +/- 4.74) MPa and (14.29 +/- 1.78)%, respectively. Remarkable improvements of 12% and 286% in the yield strength and elongation at break were achieved compared with those cast counterparts reported in the published literature. The high dislocations density (similar to 6.78 x10(14) m-2) were the dominant source of high strength and contributed-49% to the yield strength according to the theoretical calculation. Massive dislocation cells were generated around the gamma nano-precipitates during tensile deformation, improving the dislocation storage capacity and the work hardening ability. These findings validated the LPBF printability and the property enhancement of Cu-15Ni-8Sn and provided a promising strategy for the design of high strength and ductility copper alloys through layered precipitation microstructures.
学科与关键词
文献加载失败,请重试
重试