ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Microstructure, shape memory properties, and in vitro biocompatibility of porous NiTi scaffolds fabricated via selective laser melting

Lu, H. Z.; Ma, H. W.; Luo, X.; Wang, Y.; Wang, J.; Lupoi, R.; Yin, S.*; Yang, C.*南方医科大学; 中山大学
Journal of Materials Research and Technology-JMR&T2021-11DOI: 10.1016/j.jmrt.2021.11.112
32被引21阅读
引用收藏
分享

摘要

In this study, three porous NiTi scaffolds with the same porosity but different pore sizes (900, 835, and 618 mm) were fabricated via selective laser melting (SLM). The microstructure, mechanical properties, shape memory properties, and in vitro biocompatibility of the different porous NiTi scaffolds were studied systematically by scanning electron microscopy, micro computed tomography, differential scanning calorimetry, compressive testing, and in vitro cell culture experiments. The pore sizes of the SLM porous NiTi scaffolds were smaller than those of computer-aided design models owing to the existence of spatter powders, whereas the strut diameters showed the opposite tendency. Furthermore, the elastic modulus of the three NiTi scaffolds was close to that of human bones and lower than that of most previously reported porous NiTi and Ti alloys with similar porosities. Moreover, the scaffolds demonstrated better compressive strength than that of most of the reported porous NiTi alloys with similar porosities as well as better strength and fracture strain than those of human bones, particularly for scaffolds with larger pore sizes. Moreover, the best recoverable strain of 5.10% and recovery rate of 91.4% were obtained for porous NiTi scaffolds with a pore size of 900 mm owing to their minimal stress concentration during loading. The in vitro study further demonstrated that a relatively small pore size could promote the bridging growth of cells in pores, and the in vitro biocompatibility of the porous NiTi scaffolds was equivalent to that of bulk SLM NiTi. The results obtained in this study can provide guidance for the application of porous NiTi scaffolds in biological implants.

学科与关键词

关键词
Selective laser meltingPorous NiTi scaffoldsElastic modulusBiocompatibilityShape memory properties
相关
加载中…

文献加载失败,请重试

重试

发表信息

论文状态
公开发表
期刊
Journal of Materials Research and Technology-JMR&T
发表日期
2021-11
卷期
第 15 卷
页码
6797-6812
DOI
10.1016/j.jmrt.2021.11.112
期刊等级
2区
成果收录
SCIE
资助标注
Key Area Research and Development Program of Guangdong Province [2020B090923001]; National Natural Science Foundation of China [U19A2085]; Key Basic and Applied Research Program of Guangdong Province [2019B030302010]; China Scholarship Council [202006150087]

作者

  • L

    Lu, H. Z. (第一作者)

    2

  • M

    Ma, H. W.

查看全部 8 位作者收起作者
  • L

    Luo, X.

  • W

    Wang, Y.

    southern med univ

  • W

    Wang, J.

    sun yat sen univ

  • L

    Lupoi, R.

    2

  • Y

    Yin, S. (通讯)

    2

  • Y

    Yang, C. (通讯)

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417