Hot deformed anisotropic nanocrystalline NdFeB based magnets prepared from spark plasma sintered melt spun powders

作者：Hou Y H; Huang Y L; Liu Z W^*; Zeng D C; Ma S C; Zhong Z C

来源：MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2013, 178(15): 990-997.

DOI：10.1016/j.mseb.2013.06.009

• NdFeB magnet
• Hot deformation
• Microstructure evolution
• Coercivity mechanism
• Non-uniform plastic deformation

Anisotropic magnets were prepared by spark plasma sintering (SPS) followed by hot deformation (HD) using melt-spun powders as the starting material. Good magnetic properties with the remanence J(r) > 1.32T and maximum of energy product (BH)(max) >303 kJ/m(3) have been obtained. The microstructure evolution during HD and its influence on the magnetic properties were investigated. The fine grain zone and coarse grain zone formed in the SPS showed different deformation behaviors. The microstructure also had an important effect on the temperature coefficients of coercivity. A strong domain-wall pinning model was valid to interpret the coercivity mechanism of the HDed magnets. The increase of stray field and weakening of domain-wall pinning effects were the main reasons of the decrease of the coercivity with increasing the compression ratio. The influences of non-uniform plastic deformation on the microstructure and magnetic properties were investigated. The polarization characteristics of HDed magnets were demonstrated. It was found out that the HDed magnets had better corrosion resistance than the counterpart sintered magnet.

• 单位
  华南理工大学; 南昌航空大学