ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

The Printability, Microstructure, and Mechanical Properties of Fe80-xMnxCo10Cr10 High-Entropy Alloys Fabricated by Laser Powder Bed Fusion Additive Manufacturing

Li, Kai; Trofimov, Vyacheslav; Han, Changjun*; Hu, Gaoling; Dong, Zhi; Zou, Yujin; Wang, Zaichi; Yan, Fubao; Fu, Zhiqiang*; Yang, Yongqiang
Micromachines2024-1DOI: 10.3390/mi15010123
12阅读
引用收藏
分享

摘要

This work investigated the effect of Fe/Mn ratio on the microstructure and mechanical properties of non-equimolar Fe80-xMnxCo10Cr10 (x = 30% and 50%) high-entropy alloys (HEAs) fabricated by laser powder bed fusion (LPBF) additive manufacturing. Process optimization was conducted to achieve fully dense Fe30Mn50Co10Cr10 and Fe50Mn30Co10Cr10 HEAs using a volumetric energy density of 105.82 J<middle dot>mm(-3). The LPBF-printed Fe30Mn50Co10Cr10 HEA exhibited a single face-centered cubic (FCC) phase, while the Fe50Mn30Co10Cr10 HEA featured a hexagonal close-packed (HCP) phase within the FCC matrix. Notably, the fraction of HCP phase in the Fe50Mn30Co10Cr10 HEAs increased from 0.94 to 28.10%, with the deformation strain ranging from 0 to 20%. The single-phase Fe30Mn50Co10Cr10 HEA demonstrated a remarkable combination of high yield strength (580.65 MPa) and elongation (32.5%), which surpassed those achieved in the FeMnCoCr HEA system. Comparatively, the dual-phase Fe50Mn30Co10Cr10 HEA exhibited inferior yield strength (487.60 MPa) and elongation (22.3%). However, it displayed superior ultimate tensile strength (744.90 MPa) compared to that in the Fe30Mn50Co10Cr10 HEA (687.70 MPa). The presence of FCC/HCP interfaces obtained in the Fe50Mn30Co10Cr10 HEA resulted in stress concentration and crack expansion, thereby leading to reduced ductility but enhanced resistance against grain slip deformation. Consequently, these interfaces facilitated an earlier attainment of yield limit point and contributed to increased ultimate tensile strength in the Fe50Mn30Co10Cr10 HEA. These findings provide valuable insights into the microstructure evolution and mechanical behavior of LPBF-printed metastable FeMnCoCr HEAs.

学科与关键词

关键词
additive manufacturinghigh-entropy alloysFeMnCoCrlaser powder bed fusiontransformation-induced plasticity
相关
加载中…
  • In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion
    Chen, Peng; Yang, Chao; Li, Sheng; Attallah, Moataz M.*; Yan, Ming*MATERIALS & DESIGN, 2020, 194: 108966.被引 62
  • Microstructure and mechanical behavior of additively manufactured CoCrFeMnNi high-entropy alloys: Laser directed energy deposition versus powder bed fusion
    Liu, Yanfang; Ren, Jie; Guan, Shuai; Li, Chenyang; Zhang, Yin; Muskeri, Saideep; Liu, Zhiyuan; Yu, Dunji; Chen, Yan; An, Ke; Cao, Yang*; Liu, Wei; Zhu, Yuntian; Chen, Wei; Mukherjee, Sundeep; Zhu, Ting; Chen, WenActa Materialia, 2023, 250: 118884.被引 15
  • Microstructure and Mechanical Behavior of FeNiCoCr and FeNiCoCrMn High-Entropy Alloys Fabricated by Powder Metallurgy
    Chu, Chenliang; Chen, Weiping; Chen, Zhen; Jiang, Zhenfei; Wang, Hao; Fu, Zhiqiang*Acta Metallurgica Sinica-English Letters, 2021, 34(4): 445-454.被引 8
查看全部 →

发表信息

论文状态
公开发表
期刊
Micromachines
发表日期
2024-01
卷期
第 15 卷, 第 1 期
页码
123
DOI
10.3390/mi15010123
语言
ENGLISH
成果收录
SCIE
资助标注
Fundamental Research Funds for the Central Universities

作者

  • L

    Li, Kai (第一作者)

  • T

    Trofimov, Vyacheslav

查看全部 10 位作者收起作者
  • H

    Han, Changjun (通讯)

  • H

    Hu, Gaoling

  • D

    Dong, Zhi

  • Z

    Zou, Yujin

  • W

    Wang, Zaichi

  • Y

    Yan, Fubao

  • F

    Fu, Zhiqiang (通讯)

  • Y

    Yang, Yongqiang

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417