摘要
In this present work, a novel electrostatic self-assembly method was invented to produce AlSi10Mg powders homogeneously decorated with TiC nanoparticles. The TiC/AlSi10Mg alloy with homogenous, crack-free, equiaxed and super fine-grained were produced using selective laser melting (SLM). The in-situ formation of D022-Al3Ti created by TiC and Al matrix during SLM was revealed at the first time and both TiC and D022-Al3Ti nanoparticles were extremely effective inoculant for an SLMed AlSi10Mg alloy. Therefore, the SLMed TiC/ AlSi10Mg alloy exhibited a high tensile strength (ultimate tensile strength - 456 MPa, yield strength -338 MPa) and high microhardness (131 HV0.05), which were higher than the SLMed AlSi10Mg alloy (ultimate tensile strength -437 MPa, yield strength -254 MPa and microhardness -113 HV0.05). This study can be regarded as a guidance in the fabrication of metal matrix nanocomposites using for SLM.
学科与关键词
- Microstructure and mechanical properties of a novel (TiB2+TiC)/AlSi10Mg composite prepared by selective laser meltingCheng, Wen; Liu, Yunzhong*; Xiao, Xiaojun; Huang, Bin; Zhou, Zhiguang; Liu, XiaohuiMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2022, 834: 142435.被引 29
- Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser meltingGao, C.; Wu, W.; Shi, J.; Xiao, Z.*; Akbarzadeh, A. H.*Additive Manufacturing, 2020, 34: 101378.被引 114
- Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical propertiesGao, C.; Wang, Z.; Xiao, Z.*; You, D.; Wong, K.; Akbarzadeh, A. H.*JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 281: 116618.被引 70
