ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Multiobjective optimization of a newly developed additively manufactured functionally graded anisotropic porous lattice structure

Mahbod, Mahshid; Asgari, Masoud*
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE2020-6DOI: 10.1177/0954406220903743
6被引1阅读
引用收藏
分享

摘要

In this paper, the elastic behavior of uniform and functionally graded porous lattice structures made by a double pyramid dodecahedron unit cell is investigated. Analytical solutions are derived in order to estimate the elastic moduli of the proposed structures in two directions. The analytical solution is validated by finite element simulations and experimental tests while the results show good agreement in general. The average difference between the numerical and analytical values of elastic modulus is under 14.44%, while the average error of experimental test and analytical solution is 15.69%. A comprehensive optimization is performed by considering elastic moduli in two different directions as objective functions. Various uniform lattice structures with different relative densities are optimized using NSGA-II algorithm as well as lattice structures with graded distribution of porosity. A variety of optimal designs are achieved by multiobjective optimization algorithm and the best point of the Pareto front is selected by the TOPSIS method. Furthermore, the functionally graded lattice structures are optimized by considering desirable relative densities in each layer and applying constructive constraints. Different distribution patterns of relative density are considered in layers in order to present the flexible design capability of the developed structure. The obtained results show that the elastic modulus is significantly dependent on the relative density of each layer as well as cell configuration. Also, different lattice structures could be achieved by applying desirable prescribed distribution of properties. A comparison between optimized and base model indicated that elastic moduli was considerably improved in optimized models. In optimization of uniform models, E-1 was increased by 115%, 89%, and 69% in optimized structures for relative densities of 10%, 30%, and 50%, respectively. Moreover, E-2 was improved in optimized models by 27%, 24%, and 18% for relative densities of 10%, 30%, and 50%, respectively.

学科与关键词

关键词
Functionally graded latticeanisotropic porosityadditively manufactured materialmultiobjective NSGA-IITOPSIS
相关
加载中…
  • A novel design method based onmulti-objective optimization for graded lattice structure by additive manufacturing
    Li, Xiangyun; Zhu, Liuxian; Fan, Shuaitao; Wei, Yingying; Wu, Daijian; Gong, Shan*RAPID PROTOTYPING JOURNAL, 2024, 30(6): 1170-1190.
  • Compressive properties analysis and optimization design of vat photopolymerization printed lattice structures formed by polyurethane composites
    Liu, Wangyu; Liang, Yingpeng; Ma, Chengdong; Xie, Weigui*MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2022.
  • Radial gradient design enabling additively manufactured low-modulus gyroid tantalum structures
    Song, Changhui; Chen, Jiaqi; Lei, Haoyang; Yang, Zhaobin; Deng, Zhengtai; Li, Yueyue; Wang, Jianhua; Yang, Yongqiang; Han, Changjun*International Journal of Mechanical Sciences, 2024, 262: 108710.
查看全部 →

发表信息

论文状态
公开发表
期刊
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
发表日期
2020-06
卷期
第 234 卷, 第 11 期
页码
2233-2255
DOI
10.1177/0954406220903743
语言
ENGLISH
期刊收录
NSL.SCIE
期刊等级
4区
成果收录
SCIE

作者

  • M

    Mahbod, Mahshid (第一作者)

  • A

    Asgari, Masoud (通讯)

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417