摘要
Ti-15Zr-xCu (3 ≤ x ≤ 7,wt.%) novel antibacterial and antibiofilm alloys with competitive mechanical properties,biological responses and corrosion resistance were designed and fabricated.Annealing heat treatment on Ti-15Zr-7Cu (TZC-7A),after holding for 2 h at slightly above their beta transus temperature CBTr) ensured their tensile strength (UTS),yield strength (YS) and hardness (HRV) were improved by 31.2%,20% and 12.3% respectively compared to the control without Cu,Ti-15Zr (T-15ZA).Although the 3 wt.% Cu alloy displayed the highest elongation (26%),the TZC-7A alloy also possessed a good ductility.Presence of evenly dispersed Ti2Cu and Zr2Cu Cu-rich intermetallic phases formed as interwoven and alternating lamellae within the α + β matrix as a result of Cu addition,as revealed by X-ray diffraction(XRD),scanning electron microscopy (SEM) and transmission electron microscopy (TEM).These greatly contributed to their strengthening and bactericidal properties.Over 98% antibacterial effect against E.coli and S.aureus have been imparted,coupled with excellent biofilm inhibition.Potentiodynamic polar-ization curves showed that the TZC-7A alloy possessed higher corrosion resistance than commercially pure titanium,cp-Ti;contact angle test revealed enhanced hydrophilicity;while confocal laser scanning microscopy (CLSM) and cell counting kit (CCK-8) assays also displayed drastically lowered bacterial adhe-sion rate with comparatively no cytotoxicity.Cell attachment on all alloys was similar but the best spread was obtained on TZC-7A after 24 h.The developed alloy has good potential as an antibacterial implant material with combination of optimized properties.
学科与关键词
- Remarkable bioactivity, bio-tribological, antibacterial, and anti-corrosion properties in a Ti-6Al-4V-xCu alloy by laser powder bed fusion for superior biomedical implant applicationsJu, Jiang; Zan, Rui; Shen, Zhao; Wang, Chenchen*; Peng, Peng; Wang, Jun*; Sun, Baode; Xiao, Bo; Li, Qian; Liu, Shaofei; Yang, Tao*Chemical Engineering Journal, 2023, 471: 144656.被引 4
- Molecular mechanisms of osteogenesis and antibacterial activity of Cu-bearing Ti alloy in a bone defect model with infection in vivoYang, Jun; Qin, Hanjun; Chai, Yu; Zhang, Ping; Chen, Yirong; Yang, Ke; Qin, Min; Zhang, Yifang; Xia, Hong*; Ren, Ling*; Yu, Bin*Journal of Orthopaedic Translation, 2021, 27: 77-89.被引 35
- Influence of Heat Treatment on Microstructure and Mechanical Properties of Ti30Nb5Ta6Zr Alloy顾桂月; 陈锋; 张强; 余新泉2010.
