摘要
Ti-6Al-4V alloys, widely used as medical implants, suffer from low wear resistance inhuman body fluids, restricting their applications in the biomedical field. This study fabricated a series of novel Ti-6Al-4V-xCu (x = 3, 5, 8, 10 wt%) alloys using laser powder bed fusion (L-PBF) to find a good combination of excellent bio-tribological, corrosion resistance, antibacterial property, and bioactivity. Results showed that the microstructure was comprised of alpha and Cu-rich beta phase in the Ti-6Al-4V-3Cu and-5Cu alloys, while the alpha+Cu-rich beta + nano Ti2Cu microstructures were observed in the alloys with Cu content above 8 wt%. The micro-hardness, bio-tribological , and corrosion resistance of Ti-6Al-4 V-xCu alloys were significantly improved with increasing the Cu content, and the L-PBF Ti-6Al-4V-10Cu alloy exhibited the best combination of properties: the micro-hardness reaches 596.8 HV, ascribed to the solid solution, grain refinement, and precipitation strengthening; the corrosion density is similar to 2 orders and a wear rate similar to 1 order of magnitude lower than Ti64 alloy, showing optimal corrosion and bio-tribological properties; and the antibacterial rates against E. coli. and S. aureus reach similar to 98% and similar to 100%. The newly developed Ti-6Al-4V-xCu alloy was demonstrated with non-cytotoxicity and excellent antibacterial property, which is a promising candidate for superior biomedical implant applications.
学科与关键词
- In situ alloying Ti-Ag antibacterial biomaterials via laser powder bed fusion: Microstructure, mechanical properties and bioperformanceSong, Changhui*; Chen, Yongqi; Liu, Lisha; Lei, Haoyang; Yang, Xinji; Hu, Jian; Li, Qian; Yang, Yongqiang; Li, Yueyue*Materials Today Advances, 2023, 20: 100445.
- Overcoming the strength-ductility trade-off and anisotropy of mechanical properties of Ti6Al4V with electron beam powder bed fusionLi, Jiayin; Liu, Xiaotao; Luo, Xuan; Gao, Fei; Zhao, Chao; Ma, Bowen; Li, Dongdong*; Yang, ChaoMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2023, 879: 145301.被引 1
- Preliminary study of microstructure,mechanical properties and corrosion resistance of antibacterial Ti-15Zr-xCu alloy for dental applicationSharafadeen Kunle Kolawole; Wang Hai; Shuyuan Zhang; Ziqing Sun; Muhammad Ali Siddiqui; Ihsan Ullah; Wei Song; Frank Witte; Ke Yang2020, 50(15): 31-43.
