摘要
The effect of annealing at 700, 800, 900 and 1000 degrees C on the microstructure and mechanical properties of alloy Ti - 6% Al - 4% V obtained by selective laser melting is studied. The ultimate tensile strength, the yield strength, the elongation, and the hardness of samples of the titanium alloy are determined in the initial condition and after annealing. X-ray diffraction and phase analyses are performed. The changes in the structure of the alloy during annealing at different temperatures are analyzed. It is shown that the intensity of the structural changes increases with the annealing temperature, while the microhardness and the strength characteristics decrease, and the ductility grows.
学科与关键词
关键词
alloy Ti6% Al4% Vevolution of microstructureheat treatmentmechanical propertiesselective laser melting
- Densification, Tailored Microstructure, and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy via Annealing Heat TreatmentWang, Di; Wang, Han; Chen, Xiaojun; Liu, Yang*; Lu, Dong; Liu, Xinyu; Han, Changjun*Micromachines, 2022, 13(2): 331.被引 9
- Influence of substructures on the selective laser melted Ti-6Al-4V alloy as a function of laser re-meltingKarimi, J.*; Xie, M. S.; Wang, Z.*; Prashanth, K. G.Journal of Manufacturing Processes, 2021, 68: 1387-1394.被引 25
- Investigation into the microstructure and dynamic compressive properties of selective laser melted Ti-6Al-4V alloy with different heating treatmentsLiu, Yang*; Xu, Huaizhong; Zhu, Lei; Wang, Xiaofeng; Han, Quanquan; Li, Shuxin; Wang, Yonggang*; Setchi, Rossitza; Wang, Di*Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2021, 805: 140561.被引 33
