ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

An investigation on microstructure and mechanical properties of strong yet ductile nanoparticle-strengthened, partially recrystallized, medium-entropy alloy

Peng, Hanlin*; Huang, Siming; Hu, Ling; Baker, Ian
Intermetallics2024-3DOI: 10.1016/j.intermet.2024.108182
6阅读
引用收藏
分享

摘要

Influences of both aging temperature and vanadium addition on the microstructure and mechanical properties of a nanoparticle-strengthened, partially-recrystallized, medium-entropy alloy (MEA) Ni43.4Co25.3Cr25.3Al3Ti3 were probed in the present work. Aging (700 degree celsius or 900 degree celsius) produced both a high density of nano-sized L1(2) precipitates, and a heterogeneous grain structure, which consisted of fine soft recrystallized grains surrounded by harder relatively large unrecrystallized grains. The volume fraction and size of the nanoparticles were strongly dependent on the heat treatment, as was the partitioning of the V, i.e., almost evenly distributed between the f.c.c. matrix and L1(2) precipitates at 700 degree celsius but partitioned more to the f.c.c. matrix with a coefficient of 1.9 at 900 C. The yield strength (YS), ultimate tensile strength (UTS), and elongation to failure (epsilon) simultaneously increased with decreasing temperature from 298 K to 77 K. The V-doped MEA shows an excellent combination of strength and elongation, viz. YS of 1035 similar to 1637 MPa, UTS of 1587 similar to 1983 MPa, and epsilon of 17.6-37.7 % for the V-free MEA, and YS of 1274 similar to 1929 MPa, UTS of 1694 similar to 2147 MPa, and epsilon of 6.6-24.8 % for V-doped MEA. The excellent strength of the MEA resulted from a combination of back-stress hardening (1108-1195 MPa corresponding to 51-60 % of the flow stress), Hall-Petch strengthening, and hardening from pre-existing dislocations (199-355 MPa) at 298 K and 77 K. Increasing the aging temperature promoted a transition in the deformation behavior from heterogeneous to homogeneous, and produced a greater abundance of nanoscale deformation twins, stacking faults, and dislocation networks, leading to the exceptional monotonic decreased strain-hardening rates during tensile tests at 293 K and 77 K.

学科与关键词

关键词
Medium-entropy alloysVanadium dopingMicrostructuresMechanical propertiesBack stressDeformation mechanisms
相关
加载中…
  • Excellent cryogenic mechanical properties of a novel medium-entropy alloy via vanadium-doping and hetero-grain/precipitation engineering
    Peng, Hanlin*; Hu, Ling; Li, Likun; Wang, Haiyan; Zhang, Yupeng; Huang, Siming; Li, Liejun; Baker, IanMaterials Characterization, 2024, 207: 113600.
  • Microstructures and deformation mechanisms of the medium-entropy alloy (NiCoCr)76(Ni6AlTi)3
    Peng, Hanlin*; Hu, Ling*; Chen, Junfu; Huang, Siming; Li, Liejun; Yi, Yaoyong; Zhou, Feng; Fang, Weiping; Baker, IanMaterials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2022, 849: 143449.被引 6
  • Thermal stability of microstructure and their influences on mechanical properties of precipitation-hardened medium-entropy alloy Ni43.4Co25.3Cr25.3Al3Ti 3
    Peng, Hanlin*; Hu, Ling; Huang, Siming; Zhang, Yupeng; Yi, Yaoyong; Li, Liejun; Baker, IanMaterials Characterization, 2023, 203: 113156.被引 3
查看全部 →

发表信息

论文状态
公开发表
期刊
Intermetallics
发表日期
2024-03
卷期
第 166 卷
页码
108182
DOI
10.1016/j.intermet.2024.108182
语言
ENGLISH
成果收录
SCIE
资助标注
GDAS' Project of Science and Technology Development [2020GDASYL-20200301001, 2022GDASZH-2022010107]; Guangdong Basic and Applied Basic Research Foundation [2022A1515110390]; Guangzhou Basic and Applied Basic Research Foundation [2023A04J0994]; Science and Technology Planning Project of Guangdong Province [2022B1212050001]; Ministry of Science and Technology of the People's Republic of China [2020YFE0205300]

作者

  • P

    Peng, Hanlin (通讯) (第一作者)

  • H

    Huang, Siming

查看全部 4 位作者收起作者
  • H

    Hu, Ling

  • B

    Baker, Ian

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417