ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: Design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms

Li, Qiuge; Li, Guichuan*; Lin, Xin*; Zhu, Daiman; Jiang, Jinhang; Shi, Shuoqing; Liu, Fenggang; Huang, Weidong; Vanmeensel, Kim南昌航空大学; 西北工业大学
Additive Manufacturing2022-9DOI: 10.1016/j.addma.2022.102967
34被引6阅读
引用收藏
分享

摘要

Laser Powder Bed Fusion (L-PBF) provides great advantages in creating supersaturated solid solutions due to its intrinsic ultrafast cooling and high solidification rate, which is particularly desired for enhanced solid solution strengthening and precipitation strengthening. In the present work, a novel high strength Zr/Sc/Hf-modified AlMn-Mg alloy with a good L-PBF processability is investigated. The as-built alloy exhibits a heterogeneous microstructure featuring a bi-modal grain structure with coarse columnar and fine equiaxed grains and heterogeneously distributed nanometer and submicrometer-sized cuboid-shaped primary Al-3(Sc,Zr,Hf) particles. The Al-3(Sc,Zr,Hf) phase, exhibiting a homogeneous elemental distribution of Zr, Sc, and Hf, adopts a cubic L12 structure with a lattice parameter of 0.4044 +/- 0.009 nm, showing a good coherency with alpha-Al. Additionally, the rapid L-PBF solidification enables the formation of submicrometer-sized elongated and globular primary Al6Mn and a supersaturated Al matrix with a high dislocation density. This results in a good combination of strength (yield strength of 438 +/- 3 MPa and ultimate tensile strength of 504 +/- 2 MPa) and ductility (elongation at fracture of 10.9 +/- 1.4 %), with a moderate work hardening strength of 113 +/- 12 MPa. Direct-ageing at 325 ?C for 10 h promotes the formation of a large amount of rod-shaped Al6Mn precipitates and a few spherical Al-3(Sc, Zr,Hf) nanoprecipitates. The heat treatment increases the hardness from 166 +/- 2 HV in as-built condition to 173 +/- 4 HV and enhances the tensile strength (yield strength of 487 +/- 2 MPa and ultimate tensile strength of 542 +/- 3 MPa) but slightly reduces the ductility to 7.4 +/- 0.7 %. The high strength was achieved by the synergistic effect of grain boundary strengthening, solid solution strengthening, and Orowan strengthening mechanisms.

学科与关键词

关键词
Additive ManufacturingLaser Powder Bed FusionAluminum alloyPrecipitationStrengthening mechanisms
相关
加载中…
  • Microstructure characterization and mechanical performance of laser powder bed fusion processed AlMgScZr alloy: Effect of heat treatment
    Li, Xiang; Liu, Yunzhong*Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2023, 862: 144501.被引 4
  • Microstructure evolution and strengthening mechanisms of a high-performance TiN-reinforced Al-Mn-Mg-Sc-Zr alloy processed by laser powder b e d fusion
    Tang, Hao; Xi, Xiaoying; Gao, Chaofeng; Liu, Zhongqiang; Zhang, Jiantao; Zhang, Weiwen; Xiao, Zhiyu*; Rao, Jeremy Heng*JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2024, 187: 86-100.
  • Laser powder bed fusion of a novel crack-free Al-Mg-Sc-Zr alloy: Printability, microstructure characterization and mechanical performance
    Li, Xiang; Liu, Yunzhong*; Tan, Chaolin; Zou, YongmingOptics and Laser Technology, 2023, 162: 109281.被引 2
查看全部 →

发表信息

论文状态
公开发表
期刊
Additive Manufacturing
发表日期
2022-09
卷期
第 57 卷
页码
102967
DOI
10.1016/j.addma.2022.102967
期刊等级
1区
成果收录
SCIE
资助标注
China Scholarship Council (CSC) [201906295010, 201706220083]; Top Interna- tional University Visiting Program for Outstanding Young Scholars of Northwestern Polytechnical University

作者

  • L

    Li, Qiuge (第一作者)

    northwestern polytech univ

  • L

    Li, Guichuan (通讯)

    b

查看全部 9 位作者收起作者
  • L

    Lin, Xin (通讯)

    northwestern polytech univ

  • Z

    Zhu, Daiman

    b

  • J

    Jiang, Jinhang

    northwestern polytech univ

  • S

    Shi, Shuoqing

    northwestern polytech univ

  • L

    Liu, Fenggang

    northwestern polytech univ · nanchang hangkong univ

  • H

    Huang, Weidong

    northwestern polytech univ

  • V

    Vanmeensel, Kim

    b

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417