摘要
A low-alloyed Mg-1.2Zn-0.1Ca (wt.%) alloy was fabricated via low-temperature extrusion and annealing at 250 & DEG;C for different times (10, 30, and 90 min) to attain heterostructures with different fine-grained fractions, focusing on the effect of heterostructure on the mechanical properties. Partial dynamic recrys-tallization (RX) occurred during extrusion at 150 & DEG;C, and a lamellar structure consisting of fine RX grains and coarse unRX grains was obtained. The subsequent annealing promoted static RX in the as-extruded alloy, leading to an increased fine-grained fraction from 67% to 95%. Meanwhile, the co-segregation of Zn and Ca atoms impeded the migration of grain boundaries, thus achieving a fine grain size of 0.8- 1.6 & mu;m. The sample annealed for 10 min with a fine-grained fraction of 73% and an average RX grain size of 0.9 & mu;m exhibited a superior combination of high yield strength (305 MPa) and good ductility (20%). In comparison, an excellent elongation of 30% was achieved in the alloy with a nearly fully-RXed mi-crostructure and an average grain size of 1.6 & mu;m after 90 min annealing, despite a lower yield strength of 228 MPa. In unRX grains, the hard orientation with ( 01-10 ) parallel to the extrusion direction and high-density dislocations made it more difficult to deform compared with the RX grains, thus producing hetero-deformation induced (HDI) strengthening. Besides fine grains and high-density dislocations, HDI strengthening is the key to achieving the superior mechanical properties of the low-alloyed Mg alloy. & COPY; 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
学科与关键词
- Achieving superior mechanical properties in a low-alloyed magnesium alloy via low-temperature extrusionWang, H.; Zhang, D. T.*; Qiu, C.; Zhang, W. W.; Chen, D. L.*Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing , 2022, 851: 143611.被引 17
- Microstructure and tensile properties of a low-alloyed magnesium alloy: effect of extrusion temperatureWang, H.; Zhang, D. T.*; Qiu, C.; Zhang, W. W.; Chen, D. L.*Journal of Materials Science, 2023, 58(33): 13502-13517.
- Effect of texture on deformation behavior of heterogeneous Mg-13Gd alloy with strength-ductility synergyLiu, Shuaishuai; Liu, Han; Chen, Xiang; Huang, Guangsheng*; Zou, Qin; Tang, Aitao; Jiang, Bin*; Zhu, Yuntian; Pan, FushengJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2022, 113: 271-286.被引 30
