摘要
A nickel-titanium (NiTi)-based intermetallic coating was in-situ synthesized on a Ti-6Al-4V (TC4) substrate via laser melting deposition (LMD) using Ni-20Cr and TC4 powders. Scanning electron microscopy, X-ray diffraction, a digital microhardness tester and an electrochemical analyzer were used to evaluate the microstructure, Vicker's microhardness and electrochemical corrosion resistance of the intermetallic coating. Results indicate that the microstructure of the intermetallic coating is composed of NiTi2, NiTi and Ni3Ti. The measured microhardness achieved is as high as similar to 850 HV(0.)2, similar to 2.5 times larger than that of the TC4 alloy, which can be attributed to the solid solution strengthening of Al and Cr, dispersion strengthening of the intermetallic compounds, and grain refinement strengthening from the rapid cooling of LMD. During the electrochemical corrosion of 3.5% NaCl solution, a large amount of Ti ions were released from the intermetallic coating surface and reacted with Cl- ions to form [TiCl6](2) with an increase in corrosion voltage. In further hydrolysis reactions, TiO2 formation occurred when the ratio of [TiCl6](2) reached a critical value. The in-situ synthesized intermetallic coating can achieve a superior corrosion resistance compared to that of the TC4 alloy.
学科与关键词
- Corrosion behavior of Ni-based coating with Ni-coated TiC-reinforced particles by induction cladding in molten brassPan, Chenggang*; Ma, Kaijiang; Chen, Xiang; Feng, Siqi; Fang, Chengjie; Yang, Hui; He, PengMaterials Chemistry and Physics, 2023, 296: 127257.被引 4
- Microstructure and mechanical properties investigation of Ni35A-TiC composite coating deposited on AISI 1045 steel by laser claddingZhang, Hao; Lian, Guofu; Cao, Qiang; Pan, Yingjun*; Zhang, Yang*INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 118(3-4): 1269-1282.被引 5
- 激光熔化沉积Ti6Al4V/Inconel625梯度耐高温涂层组织演变行为研究季霄; 孙中刚; 唱丽丽; 常辉; 邢飞中国激光, 2019, (11): 145-153.
