ScholarMate
English简体中文繁體中文
客服热线:400-1616-289
登录注册
期刊论文

Corrosion behavior of Ni-based coating with Ni-coated TiC-reinforced particles by induction cladding in molten brass

Pan, Chenggang*; Ma, Kaijiang; Chen, Xiang; Feng, Siqi; Fang, Chengjie; Yang, Hui; He, Pengwuhan univ sci & technol; wuhan second ship design & res inst
Materials Chemistry and Physics2023-2-15DOI: 10.1016/j.matchemphys.2022.127257
4被引10阅读
引用收藏
分享

摘要

In order to improve the wettability of TiC-reinforced particles with Ni-based alloy and decrease electrical re-sistivity of TiC-reinforced particles, Ni-coated TiC particles were fabricated by electroless plating method. Further, Ni-based coatings with Ni-coated TiC-reinforced particles on the surface of H13 steel were prepared by induction cladding. The microstructure and phase compositions of the coatings were analyzed by optical mi-croscopy, scanning electron microscopy and X-ray diffraction. The microhardness of the coatings was measured by a microhardness tester. The corrosion behaviors of the H13 substrate and Ni-based coatings with and without Ni-coated TiC-reinforced particles in molten brass were investigated. The results showed that the addition of Ni-P layer of approximately 1.2 mu m thickness on TiC particles by electroless plating significantly increased cladding temperature of Ni-based coating reinforced by TiC particles, and reduced coating thickness, defects, size of the precipitated phases and microstructure inhomogeneities. The surface microhardness of the Ni-based coating with Ni-coated TiC-reinforced particles is 168% higher than that of the substrate and 17% higher than that of the Ni-based coating. The zinc in the molten brass intruded into the H13 steel and formed mixed oxides of iron, chromium and zinc in the surface layer of the substrate with the intruded oxygen. Then the mixed oxides peeled off in the mixed oxide zoneIIof Fe and Zn adjacent to corroded surface, while the corrosive mechanism of the Ni-based coatings involves the rapid dissolution of Ni and Si of the received coatings into the molten brass and the oxidation of Si and Zn at the corrosion interface which then peeled off in the mixed oxide zone I of Zn and Si adjacent to the coating. The addition of Ni-coated TiC-reinforced particles refined the size of carbide and boride precipitates, preventing the formation of large corrosion pits formed in the matrix phase, and effectively slowed down uneven corrosion of the Ni-based coating.

学科与关键词

关键词
Ni-coated TiCNi-based coatingInduction claddingMolten brassCorrosion
相关
加载中…
  • Microstructure and Superior Corrosion Resistance of an In-Situ Synthesized NiTi-Based Intermetallic Coating via Laser Melting Deposition
    Deng, Cheng; Jiang, Menglong; Wang, Di; Yang, Yongqiang; Trofimov, Vyacheslav; Hu, Lianxi; Han, Changjun*Nanomaterials, 2022, 12(4): 705.被引 10
  • Effect of CeO2 on microstructure and properties of Ni-Co-based coatings
    Zhu, Rong; Zhu, Chengyi*; Wu, Shuang; Wan, Xiangliang; Li, GuangqiangJournal of Materials Research and Technology-JMR&T, 2023, 26: 7329-7339.被引 1
  • Preparation and characterization of Ni-Co-TiN/CeO2 composite coating by jet electrodeposition for improved mechanical and anti-corrosion properties
    Chen, Yuanlong; Li, Huigui; Fang, Cheng; Deng, Weiping; Zhu, Fankai; He, Gaoqing; Tian, Zongjun; Jiang, Wei*Surface Topography-Metrology and Properties, 2023, 11(3): 035011.被引 2
查看全部 →

发表信息

论文状态
公开发表
期刊
Materials Chemistry and Physics
发表日期
2023-02-15
卷期
第 296 卷
页码
127257
DOI
10.1016/j.matchemphys.2022.127257
语言
ENGLISH
成果收录
SCIE
资助标注
National Natural Science Foundation of China [51375353]

作者

  • P

    Pan, Chenggang (通讯) (第一作者)

    wuhan univ sci & technol

  • M

    Ma, Kaijiang

    wuhan univ sci & technol

查看全部 7 位作者收起作者
  • C

    Chen, Xiang

  • F

    Feng, Siqi

  • F

    Fang, Chengjie

    wuhan univ sci & technol

  • Y

    Yang, Hui

    wuhan second ship design & res inst

  • H

    He, Peng

    wuhan second ship design & res inst

登录解锁更多功能

  • 收藏这篇,随时在“我的 · 收藏”找回
  • 认领你的成果,生成推广素材
  • 关注作者获取最新成果
  • 加入项目组、协同写作
注册 / 登录

产品服务

  • 科研之友
  • 创新城
  • 科创云

服务支持

  • 帮助中心
  • 隐私政策
  • 服务条款

联系方式

在线客服:【】
客服热线:400-1616-289
电子邮箱:support@scholarmate.com

关注或下载科研之友

微信二维码
微信公众号
客户端下载二维码
下载客户端
科研成果科研人员科研机构科研动态爱瑞思软件

©2026 深圳市科研之友网络服务有限公司

公安备案图标粤公网安备 44030502000213
粤ICP备 16046710 号粤B2-20110417